Guide on How to Clean Vacuum Hose | Regular Maintenance for Better Cleaning
One of the most efficient home cleaning tools is the best carpet cleaner, or your favorite vacuum cleaner. A vacuum cleaner is the best tool to thoroughly clean your carpets, upholstery, curtains, car seats and more. And a vacuum will never be able to clean thoroughly if this is not well maintained as well.
An efficient vacuum is a clean vacuum. This guide will show you how to clean a vacuum hose and how to maintain a regular vacuum cleaner so that it will last for years to come.
How to clean a vacuum hose?
The vacuum hose extends the reach of your vacuum. Most vacuum cleaners have retractable hoses to help you clean hard to reach areas without carrying the heavy vacuum body. By adding a telescopic tool, you can further remove dust and dirt even farther. So, your vacuum can clean your floors, carpets, and curtains plus remove dust on top shelves, ceiling fans and so on.
Because of the hose's flexible design, it is very susceptible to clogging. Large clumps of hair, dust, and dirt can easily accumulate inside the hose and affect the performance of your vacuum. Therefore, the very first thing you need to learn is how to unclog a vacuum cleaner hose.
Unclogging and cleaning a vacuum hose using a physical means
Unplug the vacuum and remove the hose from the vacuum body.
Vacuums come in different designs. Refer to your owner’s manual if you are unsure how to remove the vacuum hose.
Lay the hose flat to initially loosen the clog inside.
If you can, roll the hose to further loosen the clog. Retract the hose body carefully to remove stuck dirt. Afterward, shake the hose to remove the clog.
Inspect the hose to check if the clog remains.
Look from one end of the hose. As you can see the corrugated body of the hose makes it easier for dust and hair to clog.
Use a broom handle or any long stick to remove the clog.
Insert the broom handle or stick from one end. Use a bit of force to remove the clog. Once it’s out, shake the hose body to further remove the dirt.
Large items like paper clips, clothes and paper can also block the hose. How to get a sock out of a vacuum hose? Use a broom handle or stick to get the item out. If the sock or stuck item has moved farther into the vacuum body, you may be able to get it from the vacuum bag. Detach the vacuum cleaner bag and remove all its contents to get the stuck item.
Cleaning with bleach and soap
Mix dish soap and bleach to clean the hose
Wash the hose in your kitchen sink. Trap about four inches of hot water in your sink. Add a squirt of dish soap and two tablespoons of bleach.
If you are asking how to clean a smelly vacuum hose then this might answer your question.
Smells may be due to rotting food or anything that’s stuck inside the hose. Bleach and dish soap should remove all smelly odors fast.
Submerge the vacuum hose in the sink
After you have removed the clog physically, submerge the hose in the solution for a few minutes. Let the solution move through the hose to remove any remaining dirt.
You can also use this method if you failed to remove the clog physically. The solution will soften the clog and afterward, it will be easier to remove with a broom handle or stick.
Clean the outside portion of the hose
Use the same mixture to clean the outer portion of the hose. Use a scrubber or a cleaning cloth. If the outer portion is very dirty, submerge the hose longer in the mixture.
Rinse the hose in running water
Remove the hose from the mixture and drain the water. Open the taps and rinse the inside and outside portion of the hose. Do this for a few minutes or until you have completely removed all the dirt and the clog.
Inspect the hose
Check the hose by straightening it and looking through. If you spot any remaining dirt, remove this with a bottle washer. Remember that there shouldn’t be any dirt left inside the hose because this will affect the vacuum’s performance.
Hang the vacuum hose to dry
When the hose is completely clean and unclogged, hang it to dry.
How to unclog a vacuum cleaner hose?
One of the most common problems that users often encounter is their vacuum not picking up dirt. Usually, this could be due to blocked filters which mostly need cleaning or replacing. This may also be due to a blocked hose.
Unblocking the vacuum hose
If your vacuum cleaner is not picking up dirt despite a strong motor, inspect the hose. Remove the hose from the vacuum and check if the machine is able to work. If it does, you have a clogged hose. Remove the hose from the machine and unclog it.
Cleaning the vacuum filter
There are two kinds of vacuum filters: reusable filters and disposable filters. If you are using disposable ones, just replace your vacuum filters with fresh ones. Make sure that this is compatible with your vacuum cleaner model.
It is recommended that you check your filters regularly. If you use your vacuum daily, change a disposable filter every six months. But if the filters are very dirty, these should be replaced as soon as possible.
If you are using reusable ones, remove the filter from the machine and clean it. Take note that it has to be specifically mentioned in the instructions that your filters are washable. Do not wash disposable vacuum filters.
Also, broken filters and old reusable filters that are already falling apart should be replaced. These will never be efficient in trapping dirt and dust anymore.
Remove the vacuum filter from the vacuum. Follow manufacturer’s instructions on how to locate and remove the filter.
Remove dirt and dust manually by picking these up or slightly tapping the filter to remove the dirt into a plastic bag.
Clean the filter with dish soap and running water. Rinse it completely.
Air dry the vacuum filter. Make sure that it’s completely dry before placing it back inside the vacuum.